Decoupage To Wood
Decoupage To Wood. Stain your wood surface if any wood will show through the decoupage. I used it to seal my piece as a top coat, used it to decoupage my fabric, and you can even use it as a glaze or a stain.
After drying, add 2 coats of the mod podge allowing each coat to dry in between. If needed, continue the decoupage down the sides of your piece of wood. Apply a thin layer of mod podge, covering the entire bottom surface.
Step 1 apply a liberal amount of the satin clear coat over the wood with a good quality paintbrush.
Repeat until desired stain color is achieved. With tips on the process and products to use. Use it on wood, fabric and other porous surfaces.
Adding print and pattern to your diy wood projects is simple with tissue paper!
Isn’t the end result super cute!! Smooth it out to remove air bubbles and let dry. Instead of buying brand new, expensive furniture that comes with a rustic, eclectic look, you.
You can also use mod podge to decoupage tissue paper on metal, glass, terra cotta, and plastic.
This really is more important than anything when it comes to glass. Allow it to dry per the manufacturer's instructions before using your steel wool to buff the varnish smooth. Wood crates, wood trays, wood picture frames, wood furniture, and wood signs are all items that would look great with tissue paper decoupaged onto them.
Begin by painting a layer of the mod podge onto the area where you will be applying the paper.
Apply a thin layer of mod podge, covering the entire bottom surface. You can use a squeegee, but you just need to make sure the paper contact the glue with no air pockets. A light sanding between coats with a 220 grit sandpaper works nicely to smooth the roughness.
Once glue is cured, spray with varnish {optional}
If needed, use the cloth or ruler to press across the decoupage piece and smooth it on. Trim image to fit on wood sign. Brush on the stain, wait a few minutes, then wipe with a rag.
Comments
Post a Comment